Bottle cooling tunnel

Bottle cooling tunnel Cooling or warming water recycled Several temperature section Spay cooling or warming CE,UL,ISO

BOTTLE COOLING TUNNEL INTRODUCTION

For juice filling, the filling temperature is normally 85-95°C . This high temperature is not suitable for downstream packing. Bottle cooling tunnel is used for cooling the bottles to ambient temperature. The cooling water can be recycled and used for next section. This design reduces the water and electric consumption.

If the carbonated drink is filled in summer’s room temperature which is much higher than the usual carbonated drink’s filling temperature (4-10°C), moisture in the air will be condensed on the bottle which will bring troubles to the downstream packaging. So after the filling machine, there must be a bottle warmer to heat the bottle to the room temperature. The warmer is usually a tunnel type shower. It heats the bottle through spraying hot water to the bottle. There are usually 3 warming zones( more zones are ok). After heated by section, the bottle’s temperature could achieve 30-35 °C.

Main components of bottle warmer are frame, transferring chain, transferring system, water storage tank, recycle pump, showering device, heating device and pipes. Exchanger could adopt plate type exchanger and electric type exchanger.

PRODUCTION CAPACITY

3000-40000 bottles per hour

Bottle cooling tunnel